Menu
The Sunbrick uses the same solar replication technology proven in the Pico. Using advanced LED-driven illumination, the Sunbrick makes large-area solar simulation quick and easy with no requirements for bulb replacement or field calibration. It also has minimal warm-up time. The Sunbrick can accommodate a wide range of working areas with its modular design. Whether you need illumination in a confined space or in your entire testing facility, the Sunbrick can provide the high-quality solar simulation solution you need.
Solar Spectral Match
Sunbrick offers a high consistency, high precision spectral mismatch of less than 5% to exceed Class A requirements by a factor of 5 – as defined by ASTM E927, IEC 60904-9, and JIC C8912 Standards.
(Spectral Mismatch of <5%)
Includes Programmable Spectra
Every Sunbrick comes with the Variable Spectra module, which unlocks full spectral control using software-controlled intensity manipulation.
Also known as adjustable, dynamic, and programmable spectra, this enables control of up to 36 wavelengths to replicate virtually any solar condition.
Tileable large area
Advanced Engineered Sunlight™ for larger illumination area requirements. With its innovative tileable design, the Sunbrick is scalable to whatever illumination area you require without sacrificing spectral match, uniformity, or temporal stability.
Each brick illuminates a 25 cm x 25 cm area with a 50 cm working distance. Multiple Sunbricks are easily mounted and networked together in arrays to provide illumination as large as required.
A 16-brick array (4×4) provides a solution for a 1 m2 area, with larger-scale custom configurations easily achievable.
Custom configurations to suit your illumination requirements.
Sunbricks are easily connected into networks. Our software allows you to control all Sunbricks on a network together, or tweak individual Sunbricks.
Tune the global intensity of all your Sunbricks, boost a wavelength channel for them, or go in and tweak individual bricks or channel intensities–the Sunbrick gives you free and flexible control over your large-area solar simulation.
Compare Sunbrick Models
Various models to fit your research & testing needs
Class AAA
to ASTM E927, IEC 60904-9, and JIC C8912 standards
Class AAA
to ASTM E927, IEC 60904-9, and JIC C8912 standards
Class AAA
to ASTM E927, IEC 60904-9, and JIC C8912 standards
Class AAA
to ASTM E927, IEC 60904-9, and JIC C8912 standards
Class AAA
to ASTM E927, IEC 60904-9, and JIC C8912 standards
(extending standard requirements beyond 1400 nm limit)
Lambertian Optics
Directed Optics
Directed Optics
Directed Optics
Directed Optics
Typically 50 cm (may include reflective walls)
625 cm2 (25 cm x 25 cm) per Sunbrick unit with reflective walls.
Contact us for consultation on your application and setup needs.
0.1 – 1.0 suns equivalent intensity
Configuration specific to geographic region and array size
Powder-coated aluminium, brushed aluminium
For the latest information on the Sunbrick large area solar simulator please download the LED Solar Simulation Brochure. Included is everything you need to know about the Sunbrick, as well as a complete specification sheet. If you would like to know more please get in touch.
Fill out the form below to learn more about the Sunbrick solar simulator – we will get back to you withing 1 business day!
Read a case study of a customer who purchased a 128 large array of sunbricks
For everything you need to know about Solar Simulation please visit our Solar Simulation Article.
Looking for smaller applications of solar simulation? Please visit our Pico small area solar simulation page.
Sign up for G2V Optics newsletter
© Copyright 2016-2021 G2V Optics Inc.
